X.25事件调试信息

意义

X.25: bad input packets LCI.

接收分组的逻辑信道号错误

X.25: input calls called X.121 address is incorrect.

被叫地址与本地地址不符合

X.25: input calls calling address is not mapped.

主叫地址在地址映射表中查不到

X.25: can not create VC repeatedly on one map.

不能在一条地址映射上重复地创建虚电路

X.25: fragment packet failed.

分片失败

X.25: DCE can not call out.(has no incoming-only and two-way channel)

DCE无法呼出（单向呼入信道和双向信道已无空闲）

X.25: DCE can not call out.(has no free LCN)

DCE无法呼出（无空闲的逻辑信道）

X.25: DTE can not call out.(has no outgoing-only and two-way channel)

DTE无法呼出（单向呼出信道和双向信道已无空闲）

X.25: DTE can not call out.(has no free LCN)

DTE无法呼出（无空闲的逻辑信道）

X.25: DCE can not accept call.(has no outgoing-only and two-way channel)

DCE无法接受呼入（单向呼出信道和双向信道已无空闲）

X.25: DCE can not accept call.(incoming call is not in [LOC HOC] or [LTC HTC])

DCE无法接受呼入（呼入不在单向呼出信道和双向信道范围内）

X.25: DTE can not accept call.(has no incoming-only and two-way channel)

DTE无法接受呼入（单向呼入信道和双向信道已无空闲）

X.25: DTE can not accept call.(incoming call is not in [LIC HIC] or [LTC HTC])

DTE无法接受呼入（呼入不在单向呼入信道和双向信道范围内）

X.25: Delete a PVC.

删除一条永久虚电路

X.25: Bad channel range configuration, recover them to default value.

信道范围配制错误，它们将被恢复成确省值

X.25: Resend RESTART packet...

重新发送重新启动分组

X.25: Fail to malloc timer.

启动定时器失败

X.25: VC-1024s output queue has full.

虚电路1024输出队列已满

Serial0: X.25 timer T20 expired(2 times).

接口Serial0的T20定时器两次超时

Serial0: X.25 restart procedure error.

重新启动规程没有正常结束

Serial0: X.25 VC-1s timer T21 expired.

接口Serial0的虚电路1的T21定时器超时

Serial0: X.25 VC-1s timer T22 expired(2 times).

接口Serial0的虚电路1的T22定时器两次超时

Serial0: X.25 VC-1s timer T23 expired(2 times).

接口Serial0的虚电路1的T23定时器两次超时

Serial0: X.25 VC-1s idle timer expired, the VC will be cleared.

接口Serial0的虚电路1的空闲定时器超时，该虚电路将被清除。